How to delete Printer drivers from Driver Store \ Filerepository (C:\Windows\System32\DriverStore\FileRepository).

How to delete Printer drivers from Driver Store \ Filerepository(C:\Windows\System32\DriverStore\FileRepository).

1.Open a command prompt that has administrator privileges. Click Start, All Programs, and Accessories, then right-click Command Prompt, and then click Run as Administrator.

Note: The PnPUtil command-line tool does not work unless you run the command prompt as an administrator.

2. If the User Account Control dialog box appears, confirm that the action it displays is what you want, and then click Yes.

3. At the command prompt, type the command:

    pnputil.exe –e (or)  pnputil –e

Select, list of drivers shown in that list, To confirm that the driver package and the .inf that you are going to remove is a third-party one (Microsoft does not allow u to remove their things from the driver store)

3. At the command prompt, type the command:

    pnputil.exe -d Oem#.inf (or) pnputil -d Oem#.inf

Note: Make sure to replace the # with the number of the .inf file you want to remove.

For Reference:http://technet.microsoft.com/en-us/library/cc730875.aspx

Creating the Bootable USB (Pen Drive) for re‐flashing

Preparation of USB pen drive:

Step 1. Download utility form below link

ftp://ftpguest:letmein@ftp.vxl.net/Utilities/ImagingToolLX/ImagingTool.rar

Step 2. Extract the zip file “ImagingTool.rar”

Step 3. Insert the USB‐Key (Pendrive) to system

Step 4. Format the USB Key (PENDRIVE) with Fat32 FS

Step 5. Launch the unetbootin‐windows‐408.exe file

Step 6. Select the Disk image browse for the ISO file extracted “Image for LinuxR1.iso.

Step 7. Select the Type “USB Drive” then select Drive {Drive letter where USB KEY (pendrive) is mapped}

Step 8. Click OK to proceed.

Step 9. Click Exit, Eject the pendrive and plu‐in again.

Step 10. Create folder “Image” on USB Key (Pen Drive)

Step 11. Copy .tbi files on image folder created.

Now Pen drive is ready for the re‐flashing.

Re‐flashing procedure:

Step 12. 1. Plug‐in the pen drive to thin client

Step 13. Power on the thin client

Step 14. Go to CMOS and change the boot order, to boot it from a USB Key (Pen Drive)

(if USB Key does not appear in the Hard disk boot order, then in COMS > Integrated Peripherals > USB
Device Settings.

Change mode to HDD mode from Auto of listed USB Key (Pen drive) under ***USB Mass Storage Device
BootSettings*** and then save changes and reboot the thin client and go to COMS settings and select the boot
device as USB Key (Pen drive)